It is a widespread thought that broken door locks deserve nothing than a replacement. This may be true in some instances especially those where a lock has been broken totally and has encountered much damage that makes it unsalvageable. In cases like this, replacement may be inevitable. Other times, a simple workaround the components may be the key to restoring it to its working state. Irrespective of the type of lock, here are 5 ways you can try to solve the issue.
1. Evaluate the bolt
Many issues arise the bolting systems of locks. Locks may be faulty due to a busted latch bolt or due to a broken deadbolt. Whatever the case may be, these types of fault are not unusual considering the length of the metals involved. The actuating mechanisms of the lock may be disrupted and forceful attempts to enter can also lead to the bending of these metals. Jams may also occur due to the dislodgement of the springs in the lock and turn mechanisms. When taking a closer look, make sure that these bolts extend and retract and clear out any form of dirt or debris that may be holding the bolt.
2. Check the alignment
The Alignment refers to the relationship between the door lock and the jam or the strike plate. There are instances where the fault is wrongly evaluated as a broken lock. To determine which of the issues the case is, you will need to do a little diagnosis by opening the affected door, unlock and then re-lock. If you find this to work very smoothly, close the door and repeat the process. If the lock is misaligned, you will experience a reduction in the extent to which the door is useable when the door is shut while in the case of a broken lock, you’d experience a difficulty in getting the door to work perfectly in both states or in one state over the other.
3. Look at the Keyway
Fixing a keyway issue can be a daunting task to say the very least. There are two main challenges in evaluating keyway issues. First of all, assessing the keyhole is challenging because of the small size and the dark conditions. Secondly, the keyway is one of the more complicated parts of the door lock and may require some technical knowhow. To get started, check if you can insert the key and how far the key can go. Make sure you can fit the key in up to the shoulder to verify that nothing is in the keyhole. If the key fits, then the case is most likely a result of some worn out internal components
It is not unusual to see door locks become stiff and unresponsive due to the dryness and lack of lubrication to ensure smooth aligning and movement of the internal components of the lock. Simply apply some lubricant on the bolts and latches and if you can uncouple the lock, apply some of the lube to the parts to allow stuck parts to come back to life. Lubricants can be dry or oil based and one or two sprays can work wonders.
5. Call a Professional Locksmith
When all attempts to correct the faults that could be responsible for the broken lock fails. The reasonable solution is to reach out to a professional locksmith in Prahran, Melbourne.
A professional locksmith in Prahran, Melbourne will help you make repairs or completely replace the door lock based on the severity of damage and how far the door is salvageable.
Leaving your faulty door lock unattended leaves you open to the potential risks of theft and break-ins. To secure security, quickly evaluate the possible issues with your door lock and call a professional locksmith in Prahran for a detailed and quality service. Nonstop Locksmith services are always available to provide you with the best possible quality in ensuring that your door lock is properly fixed and returns to its satisfactory working state.